TDN 5-0913WI

DC/DC Converter TDN 5WI Series, 5 Watt • Ultra compact DIP package 13.2 x 9.1 x 10.2 mm • • • I/O-isolation 1'600 VDC • • • Short circuit protection • 3-year product warranty Fully regulated outputs Operating temperature range -40°C to +75°C Remote On/Off Designed to meet IEC/EN/UL 62368-1 (not certified) The TDN 5WI Series redefines the power density of high performance DC/DC converters. The cubical package of only 1.23 cm³ encloses a sophisticated circuit which provides 5 Watt output power without any compromise regarding reliability and functionality. They operate up to 50°C environment temperature at full load or up to 70°C with a 50% load de-rating. With 1'600 VDC I/O-isolation voltage, external On/Off and short current protection, they cover a wide range of application when space is limited. The input of the converters is designed for a wide voltage range (4:1) and minimum load is not required. The functional I/O-isolation system is designed to meet IEC/EN/UL 62368-1 (not certified) with a test voltage (60 s) of 1'600 VDC. Models Order Code Input Voltage Range TDN 5-0910WI TDN 5-0911WI TDN 5-0919WI TDN 5-0912WI TDN 5-0913WI TDN 5-0915WI TDN 5-0921WI TDN 5-0922WI TDN 5-0923WI TDN 5-2410WI TDN 5-2411WI TDN 5-2419WI TDN 5-2412WI TDN 5-2413WI TDN 5-2415WI TDN 5-2421WI TDN 5-2422WI TDN 5-2423WI TDN 5-4810WI TDN 5-4811WI TDN 5-4819WI TDN 5-4812WI TDN 5-4813WI TDN 5-4815WI TDN 5-4821WI TDN 5-4822WI TDN 5-4823WI www.tracopower.com 4.5 - 13.2 VDC (9 VDC nom.) 9 - 36 VDC (24 VDC nom.) 18 - 75 VDC (48 VDC nom.) Output 1 Output 2 Vnom Imax 3.3 VDC 5 VDC 9 VDC 12 VDC 15 VDC 24 VDC +5 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 9 VDC 12 VDC 15 VDC 24 VDC +5 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 9 VDC 12 VDC 15 VDC 24 VDC +5 VDC +12 VDC +15 VDC 1'000 mA 1'000 mA 555 mA 420 mA 333 mA 210 mA 500 mA 210 mA 168 mA 1'000 mA 1'000 mA 555 mA 420 mA 333 mA 210 mA 500 mA 210 mA 168 mA 1'000 mA 1'000 mA 555 mA 420 mA 333 mA 210 mA 500 mA 210 mA 168 mA November 14, 2023 Vnom Efficiency Imax –5 VDC –12 VDC –15 VDC 500 mA 210 mA 168 mA –5 VDC –12 VDC –15 VDC 500 mA 210 mA 168 mA –5 VDC –12 VDC –15 VDC 500 mA 210 mA 168 mA typ. 76 % 80 % 81 % 83 % 83 % 83 % 80 % 83 % 83 % 76 % 80 % 81 % 83 % 83 % 83 % 80 % 83 % 84 % 76 % 81 % 81 % 83 % 83 % 83 % 80 % 83 % 84 % Page 1 / 4 TDN 5WI Series, 5 Watt Input Specifications Input Current - At no load 9 Vin models: 24 Vin models: 48 Vin models: 9 Vin models: 24 Vin models: 48 Vin models: 9 Vin models: 24 Vin models: 48 Vin models: 9 Vin models: 24 Vin models: 48 Vin models: Surge Voltage Reflected Ripple Current Recommended Input Fuse Input Filter 80 mA typ. 30 mA typ. 15 mA typ. 15 VDC max. (1 s max.) 50 VDC max. (1 s max.) 100 VDC max. (1 s max.) 40 mAp-p typ. 20 mAp-p typ. 15 mAp-p typ. 2'500 mA (slow blow) 1'250 mA (slow blow) 630 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Internal Capacitor Output Specifications Voltage Set Accuracy Regulation - Input Variation (Vmin - Vmax) - Load Variation (0 - 100%) Ripple and Noise Capacitive Load - Cross Regulation (25% / 100% asym. load) - 20 MHz Bandwidth - single output - dual output Minimum Load Temperature Coefficient Start-up Time Short Circuit Protection Transient Response ±1% max. 0.2% max. 0.2% max. 1% max. 1% max. (Output 1) 1% max. (Output 2) dual output models: 5% max. single output models: dual output models: single output models: dual output models: 3.3 Vout models: 5 Vout models: 9 Vout models: 12 Vout models: 15 Vout models: 24 Vout models: 5 / -5 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: - Response Time 75 mVp-p typ. 4'400 µF max. 2'200 µF max. 1'470 µF max. 1'220 µF max. 1'000 µF max. 470 µF max. 1'000 / 1'000 µF max. 680 / 680 µF max. 440 / 440 µF max. Not required ±0.02 %/K max. 10 ms typ. / 20 ms max. Continuous, Automatic recovery 500 µs typ. (25% Load Step) Safety Specifications Standards Designed for IEC/EN/UL 62368-1 (not certified) - IT / Multimedia Equipment EMC Specifications EMI Emissions - Conducted Emissions - Radiated Emissions EN 55032 class A (with external filter) EN 55032 class B (with external filter) EN 55032 class A (with external filter) EN 55032 class B (with external filter) External filter proposal: www.tracopower.com/overview/tdn5wi All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com November 14, 2023 Page 2 / 4 TDN 5WI Series, 5 Watt EMS Immunity - Electrostatic Discharge - RF Electromagnetic Field - EFT (Burst) / Surge - Conducted RF Disturbances - PF Magnetic Field Air: EN 61000-4-2, ±8 kV, perf. criteria A Contact: EN 61000-4-2, ±6 kV, perf. criteria A EN 61000-4-3, 10 V/m, perf. criteria A EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±1 kV, perf. criteria A Ext. input component: KY 220 µF, 100 V EN 61000-4-6, 10 Vrms, perf. criteria A Continuous: EN 61000-4-8, 100 A/m, perf. criteria A 1 s: EN 61000-4-8, 1000 A/m, perf. criteria A General Specifications Relative Humidity Temperature Ranges Power Derating Cooling System Remote Control Switching Frequency Insulation System Isolation Test Voltage Isolation Resistance Isolation Capacitance Reliability Washing Process Environment Housing Material Base Material Potting Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Footprint Type Soldering Profile Weight 95% max. (non condensing) –40°C to +75°C +105°C max. –55°C to +125°C Depending on model See application note: www.tracopower.com/overview/tdn5wi Natural convection (20 LFM) On: open circuit - Current Controlled Remote Off: 2 to 4 mA current (no internal resistor) (passive = on) Refers to 'Remote' and '-Vin' Pin External circuit proposal: www.tracopower.com/info/current-remote.pdf 2.5 mA max. - Off Idle Input Current 100 kHz min. (PFM) Functional Insulation 1'600 VDC - Input to Output, 60 s 1'000 MΩ min. - Input to Output, 500 VDC 50 pF max. - Input to Output, 100 kHz, 1 V - Calculated MTBF 2'960'000 h (Vin models) 2'280'000 h (other models) (MIL-HDBK-217F, ground benign) According to Cleaning Guideline www.tracopower.com/info/cleaning.pdf MIL-STD-810F - Vibration MIL-STD-810F - Thermal Shock Non-conductive Plastic (UL 94 V-0 rated) Non-conductive Plastic (UL 94 V-0 rated) Silicone (UL 94 V-0 rated) Copper Nickel (2 - 3 µm) Tin (3 - 5 µm), matte Plastic Case PCB Mount THD (Through-Hole Device) DIP8 Lead-Free Wave Soldering 260°C / 6 s max. 2.7 g - Operating Temperature - Case Temperature - Storage Temperature - High Temperature All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com November 14, 2023 Page 3 / 4 TDN 5WI Series, 5 Watt Environmental Compliance - REACH Declaration www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a, 7c-I (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule).) b332abfa-44e4-46a5-b86a-36964124272d - RoHS Declaration - SCIP Reference Number Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/tdn5wi 13.2 (0.52) 9.9 (0.39) 5.08 (0.2) Pinout 1 5 2 6 7 9.1 (0.36) 10.2 (0.40) (3 x 0.08) 3 x 2.0 Outline Dimensions 4 4.5 (0.18) bottom viev 0.6x0.25 (0.024x0.01) Dimensions in mm (inch) Tolerances: x.x: ±0.5 (±0.02) Pin pitch tolerances: ±0.25 (±0.01) Pin diameter: ±0.1 (±0.004) © Copyright 2023 Traco Electronic AG Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 2 –Vin (GND) –Vin (GND) 4 Remote On/Off Remote On/Off 5 NC –Vout 6 –Vout Common 7 +Vout +Vout NC: Not connected Specifications can be changed without notice. www.tracopower.com Rev. November 14, 2023 Page 4 / 4